# Morph & Slerp: Shape design for 3D printing of concrete

Bhooshan S., Van Mele T. and Block P.
ACM Symposium on Computational Fabrication (SCF) 2020
Cambridge
2020
doi: 10.1145/3424630.3425413

Synthesis of shapes that are guaranteed to be physically produced by Robotic 3D printing of concrete, needs research attention. This is because of the rapid development of the hardware, commercial availability of and interest in concrete printing. Furthermore, the need is amplified by the lack of easy-to-implement-and-use shape design tools. Together, they provide the context of the proposed work.

A necessary feature for geometries to be ‘printable’ is that each consecutive layer onto which material is deposited should change gradually such that it has sufficient overlap with the preceding layer (spatial coherence of print paths). The computational handling of these aspects has been established by Bhooshan et al. (2018) including the use of a time-evolving scalar field to represent the shape to be designed – so-called Function Representation (FRep). This paper significantly extends the previous work by (i) fully parametrising the shape description for 3D printing of concrete by decomposing the shape as a combination of shape interpolation (Morph) and affine interpolation (Slerp), and (ii) replacing the linear, cross-fading interpolation scheme resulting in physically problematic artefacts with a scheme that produces smooth, spatially coherent outcomes.

An easy-to-implement software application has been prototyped. It couples the shape description with a guiding heuristic to design topologically complex, physically plausible shapes with relative ease. The coupling significantly reduces the effort and expertise needed to produce shapes that are printable whilst also providing intuitive, visual feedback to designers. This is particularly useful in the current context where computer simulation of the stability of the layers during printing is actively being developed, experimental in nature and still computationally expensive. The presented approach does not, however, automatically guarantee printable outputs. The shape description and outputs may, however, be readily used as good candidates for further optimisation to guarantee print readiness.

BibTeX

@inproceedings{Bhooshan2020,
author    = "Bhooshan, S. and Van Mele, T. and Block, P.",
title     = "Morph & Slerp: Shape design for 3D printing of concrete",
booktitle = "ACM Symposium on Computational Fabrication (SCF) 2020",
year      = "2020",
editor    = "",
volume    = "",
number    = "",
pages     = "",
publisher = "",
month     = "",
doi       = "10.1145/3424630.3425413",
note      = "",
}

Related publications

ROBARCH 2018 - Robotic Fabrication in Architecture, Art and Design 2018,: 98-109,SpringerZurich,2018 (September).
Humanizing Digital Reality - Proceedings of the Design Modelling Symposium 2017,: 493-508,SpringerParis,2018 (September).

ETH Zurich
Institute of Technology in Architecture
Block Research Group
Stefano-Franscini-Platz 1, HIB E 45
8093 Zurich, Switzerland
paulson@arch.ethz.ch
block.arch.ethz.ch

+41 44 633 38 35  phone
+41 44 633 10 53  fax

Copyright © 2009-2021 Block Research Group, ETH Zurich, Switzerland.